Gutter Installation Chicago, IL

Gutter installation in Chicago and the suburbs: seamless gutters sized for your roof, pitched to drain, fastened for snow and ice, with downspouts that move water away from your foundation.

Gutters are part of your roof system. Properly sized and pitched gutters carry water away from the fascia, the siding and your foundation, and they keep meltwater from making winter ice problems worse.

Gutter installation done right means seamless runs sized for your roof’s area, hangers spaced to carry snow and ice, downspouts placed where they actually drain, and extensions that move water away from the house.

New gutters are often installed alongside a roof replacement. Doing both together lets the drip edge, the gutter apron and the gutter itself work as one system.

Gutter Installation by City

We have a dedicated gutter installation page for every city we serve. Each one covers local housing, permits and neighborhoods. Our home base is Schaumburg:

Signs You Need Gutter Installation

Water spilling over the gutter edge in heavy rain
No gutters on part of the house, with erosion below the eaves
Wet basement or pooling water near the foundation
Peeling paint or rot on fascia boards
Ice building up at the eaves and gutter line in winter
Adding a new roof and wanting a complete system

Our Gutter Installation Process

Measure and size We measure run lengths and roof area to size gutters and downspouts for heavy summer storms.
Prepare the fascia Damaged fascia and soffit are replaced so the new gutters have solid wood to fasten into.
Install seamless gutters Gutters are installed with the correct pitch toward each downspout, and hangers are spaced for snow and ice loads.
Downspouts and drainage Downspouts are placed and extended to carry water away from the foundation.

Gutter Installation by Type of Home

The northwest suburbs have every kind of house, and each one needs gutter installation handled a little differently:

Post-war ranches: Ranch homes have long, continuous eaves, so gutter pitch over a long run and enough downspouts matter more than on a compact house.
Split-levels and raised ranches: Split-levels have upper roofs that drain onto lower roofs. Where a downspout empties onto a lower roof, it needs a diverter or proper routing, or the lower gutters get overwhelmed.
Two-story homes: Two-story homes collect a lot of water per run. They often need 6-inch gutters and larger downspouts to handle a summer downpour without overflowing.
Townhomes and HOA communities: In townhome associations, gutter color, style and downspout locations are often set by the HOA, and gutter runs are shared between units.
Older homes near downtowns: Older homes near downtown often have deep eaves, original wood fascia and box gutters that have been covered over. What's behind the existing gutter matters.
1990s and 2000s subdivisions: Newer two-story homes with complex rooflines concentrate water in a few valleys and corners. Those spots need larger downspouts and correct placement.
Estate homes: Large estate roofs shed a lot of water into a small number of corners and valleys. Oversized gutters, large downspouts and planned drainage away from the foundation are standard.

How We Do Gutter Installation Right

Sizing and pitch

Gutters are sized from the roof area draining into them and the roof’s pitch. A long run needs consistent slope toward the downspouts, and very long runs get a high point in the middle with a downspout at each end.

Fastening for snow and ice

Hidden hangers screwed into solid fascia, spaced closely enough to carry winter ice loads, keep gutters from sagging and pulling away. Spikes and widely spaced hangers are why old gutters fall.

Drip edge and roof integration

The roof’s drip edge has to direct water into the gutter, not behind it. When gutters and the roof are installed together, that detail gets done right.

What to Expect

Gutter work usually takes a day or less for a typical home. We protect the landscaping under the work area, haul away the old gutters, and show you each downspout’s drainage path before we leave.

The crew sets up, removes the old system if there is one, repairs the fascia, and installs and tests the new gutters. You get a quick walk-through of the downspout locations at the end.

What Affects the Cost of Gutter Installation

total linear feet and the number of downspouts
gutter size (5-inch vs. 6-inch) and material
fascia or soffit repairs found during prep
gutter guards, if you add them
second-story and steep-roof access

Repair or Replace?

A single leaking seam or one loose section is a repair. Gutters that leak at many seams, sag along the run, are pitched the wrong way, or are too small for the roof are better replaced. We’ll tell you which one you’re looking at.

Weather in Northern Illinois

Gutters here have to handle heavy summer downpours and then carry the weight of snow and ice all winter. Undersized gutters overflow in July, and poorly fastened ones get pulled down in February.

Freeze-thaw cycles are hard on gutters. Water that sits in a sagging section freezes, expands and pulls the hangers loose, and ice at the gutter line backs meltwater up under the roof edge.

Gutter Installation: FAQ

Should I get 5-inch or 6-inch gutters?

It depends on roof area, pitch and how much water each run collects. Large or steep roofs often need 6-inch gutters with larger downspouts to keep up with heavy storms.

Do gutter guards really help?

They reduce cleaning and help keep downspouts clear. They don't replace correct sizing and pitch, and some types make ice problems worse, so we recommend them case by case.

Should I replace gutters with my roof?

If your gutters are older or undersized, doing them together is usually smart. The drip edge and gutter apron get integrated properly, and you only have one crew on site.

What gutter material do you use?

Seamless aluminum is the standard choice: no rust, low maintenance, and formed to the length of each run.

How many downspouts do I need?

Enough to handle the roof area and keep runs a reasonable length. Too few downspouts is one of the most common causes of overflowing gutters.

Get a Free Estimate

Four quick fields, and we'll call you. Or call (224) 735-4115.